Contents
Introduction:dk380c4.0-h8
The DK380C4.0-H8 is a high-performance industrial automation system designed to streamline manufacturing processes. With its advanced H8 microprocessor and modular design, it offers precision control and energy efficiency for various applications. Ideal for industries like automotive, electronics, and pharmaceuticals, this system supports multiple communication protocols for seamless integration. Its compact design reduces space requirements and lowers installation costs while ensuring optimal performance.
| Aspect | Fact | Figure |
|---|
| Microprocessor | 32-bit H8 microprocessor | 80 MHz |
| Memory | Flash Memory | 4 MB |
| RAM | 512 KB SRAM |
| Cache | 32 KB L1 |
| EEPROM | 128 KB |
| Ethernet Ports | Number of Ports | 2x 10/100 Mbps |
| Serial Ports | Number of Ports | 4x RS-485/232 |
| USB Ports | Number of Ports | 2x USB 2.0 |
| Fieldbus | Type | 1x CAN bus |
| Processing Speed | Response Time Under Load | 100μs |
| Concurrent Tasks | Maximum Concurrent Processes | 64 |
| Power Consumption | Power Usage at Full Load | 4.2W |
| Operating Temperature | Temperature Range | -20°C to 60°C |
| Mission Completion Rate | Task Completion for Concurrent Processes | 100% (64 tasks) |
| I/O Operations | I/O Operations per Second | 1,000 with 99.99% accuracy |
| PID Control Loop | Execution Time for Control Loop | 250μs |
| Network Communication | Ethernet Throughput | 100 Mbps full-duplex |
| Space Efficiency | Space Saved Compared to Traditional Models | 40% reduction |
| Cooling Efficiency | Reduction in Cooling Area | 25% reduction |
| Energy Savings | Reduction in Power Consumption | 15% reduction |
| Floor Space Required | Minimum Floor Space for Installation | 600mm x 700mm |
| Clearances | Front Gate Access | 800mm minimum |
| Rear Airflow | 400mm unobstructed |
| Panel Access | 500mm around each panel |
| Overhead Clearance | 750mm minimum |
What is DK380C4.0-H8? Features, Specs, and Uses Explained
The DK380C4.0-H8 is a robust and advanced industrial automation system that offers high-performance capabilities in various manufacturing and automation applications. It is designed to provide precision control, energy efficiency, and versatility for industries that rely on automation to optimize their production processes. By integrating cutting-edge technology with a modular architecture, this system helps improve productivity while maintaining operational efficiency.
This system uses a high-quality H8 microprocessor, which is known for its stability and speed. Its modular design allows for flexibility and seamless integration into existing systems, making it ideal for upgrading or enhancing automation operations. Whether you are working with assembly lines, material handling, or high-precision tasks, the DK380C4.0-H8 provides the performance and reliability needed to support demanding applications.
The versatility of the DK380C4.0-H8 makes it suitable for a wide range of industries such as automotive, pharmaceuticals, electronics, and consumer goods manufacturing. With its ability to support multiple communication protocols and provide scalable solutions, it ensures that businesses can meet their automation requirements effectively. Additionally, its compact size reduces the need for large setups, saving valuable floor space while optimizing overall system performance.
This article will explore the key features, technical specifications, common uses, and installation considerations of the DK380C4.0-H8, providing you with all the necessary information to understand how this system can benefit your business.
Key Features and Specifications of DK380C4.0-H8
| Feature | Specification |
|---|---|
| Microprocessor | 32-bit H8 microprocessor at 80 MHz |
| Flash Memory | 4 MB |
| RAM | 512 KB SRAM |
| Cache | 32 KB L1 |
| EEPROM | 128 KB |
| Ethernet Ports | 2x 10/100 Mbps |
| Serial Ports | 4x RS-485/232 |
| USB Ports | 2x USB 2.0 |
| Fieldbus | 1x CAN bus |
| Processing Speed | 100μs response time under load |
| Concurrent Tasks | Up to 64 concurrent processes |
| Power Consumption | 4.2W at full load |
| Operating Temperature | -20°C to 60°C |
Connectivity Options
Ethernet Connectivity
The DK380C4.0-H8 supports dual 10/100 Mbps Ethernet ports, allowing for efficient data transfer and reliable network communication. This makes it ideal for connecting to a variety of industrial networks.
Serial and USB Ports
It includes 4 serial ports (RS-485/232), enabling communication with various devices. Additionally, there are 2 USB 2.0 ports for peripheral connectivity.
Fieldbus Integration
With a CAN bus port, the DK380C4.0-H8 supports fieldbus communication, enhancing its ability to work with other industrial automation systems and devices.
Communication Protocols Supported
The DK380C4.0-H8 supports several widely-used communication protocols, which ensures compatibility across various systems. These include:
- Modbus TCP: For reliable industrial communication.
- ProfiNET: For real-time Ethernet communication.
- EtherCAT: Ideal for fast communication between automation devices.
- OPC UA: Ensures secure and reliable data exchange.
- MQTT: A lightweight protocol for efficient message queuing.
Common Applications and Uses
Assembly Line Control
The DK380C4.0-H8 can efficiently coordinate multiple robotic systems in an assembly line for precise product assembly, improving both speed and quality.
Quality Inspection
It is capable of processing real-time vision system data to detect and correct product defects, ensuring high-quality manufacturing standards.
Motion Control
The system manages synchronized servo axes, providing accurate control over complex production operations.
Process Tracking
It enables the tracking of manufacturing parameters throughout various processes, helping in quality control and performance monitoring.
Temperature Control
With high precision, the DK380C4.0-H8 manages multi-zone heating systems, ensuring optimal temperature regulation during production.
Material Handling
The system can synchronize conveyor systems with integrated safety protocols, streamlining the handling of materials in the production process.
Installation Requirements and Space Considerations
To ensure optimal performance, the DK380C4.0-H8 must be installed with the following considerations:
Minimum Floor Space
The required minimum floor space for installation is 600mm x 700mm. This compact size helps in saving space in crowded factory environments.
Clearances
- Front Gate Access: 800mm minimum for maintenance and servicing.
- Rear Airflow: 400mm of unobstructed space for cooling and airflow.
- Panel Access: 500mm space around each access panel for maintenance.
Overhead Clearance
Ensure that there is at least 750mm of space from the top of the device to the overhead structure for proper airflow and cooling.
Performance Evaluation
In real-world operations, the DK380C4.0-H8 has demonstrated impressive performance metrics:
- Mission Completion Rate: 100% for up to 64 concurrent tasks.
- I/O Operations: Capable of processing 1,000 I/O operations per second with 99.99% accuracy.
- PID Control Loop Execution: Executes within 250μs intervals.
- Network Communication: Sustains 100Mbps full-duplex Ethernet throughput.
Benefits of a Compact Design
The compact design of the DK380C4.0-H8 offers several advantages:
- Space Efficiency: It reduces the required floor space by 40% compared to traditional models, making it a space-saving solution.
- Cost-Effectiveness: The compact nature lowers installation costs by minimizing site preparation and infrastructure requirements.
- Cooling Efficiency: Built-in thermal management reduces the need for additional cooling equipment, cutting energy costs by 25%.
- Energy Savings: The system’s efficient design reduces power consumption by 15%, contributing to overall cost savings.
System Compatibility and Integration
Modular Design
The DK380C4.0-H8’s modular design ensures it can be easily expanded with additional I/O points and specialized features without requiring a complete system overhaul.
Communication Protocols
It supports industry-standard communication protocols, allowing it to integrate seamlessly with other systems in an industrial setting.
Diagnostics and Maintenance
The system is equipped with integrated LED indicators for real-time diagnostics, which help ensure smooth operation and easy troubleshooting.
Safety and Support
To guarantee long-term performance, the DK380C4.0-H8 comes with robust support features:
Technical Support
Access to 24/7 online technical documentation ensures that you can resolve any issues promptly.
Remote Diagnostics
Secure VPN connections are available for remote diagnostics, allowing maintenance teams to monitor the system without being physically on-site.
Spare Parts Management
Critical spare parts, such as power supply units and I/O modules, are readily available to minimize downtime in case of system failures.
Preventive Maintenance Tools
Included tools, such as digital multimeters, ESD-safe cleaning materials, and thermal imaging cameras, assist in the preventive maintenance of the system.
Conclusion
The DK380C4.0-H8 is a powerful and reliable industrial automation system designed to improve efficiency, precision, and productivity in manufacturing environments. Its high-performance specifications, modular design, and compatibility with various industrial systems make it an excellent choice for businesses looking to enhance their automation capabilities. Whether upgrading existing systems or implementing new solutions, the DK380C4.0-H8 offers versatility and scalability to meet diverse operational needs.
FAQs
1. What is the DK380C4.0-H8?
The DK380C4.0-H8 is an advanced industrial automation system that offers high-performance control, energy efficiency, and seamless integration for various manufacturing applications.
2. What industries can benefit from the DK380C4.0-H8?
Industries such as automotive, electronics, pharmaceuticals, and consumer goods manufacturing can leverage the DK380C4.0-H8 for automation tasks like assembly, material handling, and quality inspection.
3. Can the DK380C4.0-H8 be integrated with existing systems?
Yes, the DK380C4.0-H8 features a modular design and supports various communication protocols, making it easy to integrate with existing industrial automation systems.
4. What are the key features of the DK380C4.0-H8?
Key features include a 32-bit H8 microprocessor, 4MB flash memory, dual Ethernet ports, and support for multiple communication protocols such as Modbus TCP and EtherCAT.
5. What is the power consumption of the DK380C4.0-H8?
At full load, the DK380C4.0-H8 consumes 4.2W of power, making it an energy-efficient solution for industrial automation.
6. What is the operating temperature range for the DK380C4.0-H8?
The DK380C4.0-H8 operates within a temperature range of -20°C to 60°C, ensuring reliability in various industrial environments.
7. How many concurrent tasks can the DK380C4.0-H8 handle?
The DK380C4.0-H8 can handle up to 64 concurrent tasks, making it suitable for complex automation processes.
8. What is the lifespan of the DK380C4.0-H8?
With proper maintenance, the DK380C4.0-H8 has a Mean Time Between Failures (MTBF) of approximately 150,000 hours, ensuring long-term reliability.
9. Is training required to use the DK380C4.0-H8?
While the system is user-friendly, training is recommended to fully utilize its capabilities and ensure optimal performance.
10. Where can I purchase the DK380C4.0-H8?
The DK380C4.0-H8 can be purchased through authorized distributors or directly from the manufacturer’s website.